Flux Application

Flux is supplied to the spray assembly from a closed reservoir by a positive displacement gear pump with titanium and Ryton® wetted components. The flux is atomized into a fine mist at the tip of the non-clogging, large-orifice ultrasonic nozzle where it is then dispersed horizontally to the correct width by low pressure compressed air before being propelled onto the bottom side of the PCB by a vertical stream of air.

The system can be delivered as a retrofit-built-in-system or as a stand-alone-unit.

Site-map:

1. Sono-Tek-Home
2. Technology 1
3. The Book
4. Book-content
5. How Ultrasonic Nozzles Works
6. Ultrasonic Spray Nozzle Applications
7. Applications in Electronics
8. Medical Applications
9. Drop size and distribution
10. Material compatability
11. Sonotek spray shaping
12. Flowrates
13. BGA Fluxing
14. AccuMist Spray Fluxers, spraying systems
15. MCS Sonotek Modular Spryingsystems
16. Ultrasonic Nozzles
17. Nozzles Specs
18. Operating considerations
19. SonoFlux 9500 Spray Fluxing for PCBs
20. Sprayfluxers for Soldering Machines
21. Spray Fluxing from Sono-Tek for PCBs, BGAs and discrete components
22. Sonotek Pumps
23. What's New in Sprayfluxing ?
24. send info
25. Service, the key to YOUR success

LICO Electronics GmbH

Klederinger Strasse 31

A-2320 Kledering / Wien

Vienna - Austria

Tel +43.1.706 43 000

Fax +43.1.706 41 31

Em@il: h.miksch@lico.at

Em@il: office@lico.at